lycragram39

Door Handle Replacement It's worth it to replace door handles if you aren't happy with the way they appear, or if they're difficult to use. With a little patience, you can get an entirely new handle in a short time. Modern door handles are typically equipped with cover plates that conceal the screws to give them an attractive look. If the new handle doesn't already have them connected, you'll need to attach them separately. Removing the Old Handle Door handles are not only an important aesthetic addition to your home, but they're crucial for safety as they let you lock and unlock your door. As time passes, the door handle may become loose or feel a bit loose. It could also appear worn out and old. This is a clear indication that it's time to replace your door handle. If your door handle is becoming difficult to use, it may be time to replace it. This is a problem because it means that you can not lock or unlock your door which could be the risk of security for you and your family. It is also a good idea to replace your door handle when it's damaged or broken. A broken door handle is risky, particularly for elderly or children members who may struggle to open it. They may get trapped. Luckily, it's quite easy to fix a broken door handle by simply replacing the old one. Most modern door handles are a standard size and so they should fit any door. If you are not sure if your new door handle will work, remove the old one and measure its housing holes. This will help you buy the correct sized door handle. The most straightforward method to remove the door handle you have been using is to unscrew it from the door. This is usually done with the screw driver. Some door handles have the cover plate, which conceals the screws used to mount them. You will need to remove the cover plate to gain access to the screws. After you have removed the handle that was previously used, take note of the way in which the spindle is connected. This will aid in aligning the new handle. You can also remove the door handle by removing it from the latch mechanism. This is usually done with an screwdriver however you'll need to find the small latch, which is located just to the left of the trim piece. After you have removed the latch, take off the handle and strike plate. Then, remove the latch from the door's edge. Removal of the Strike Plate You'll have to replace your latch plate when you replace the handle. This is the plate that holds the hole where the latch for the door is inserted when the door closes. The new handles will have two latch plates: a rectangular and circular plate (see the image above which illustrates the components of the door handle). If you have a rectangular latch plate, replace it with an oval one. This will let the latch hook onto the strike plate and make the handle more convenient. The first step is to unhook the screw that holds the old latch plate. The screws are usually quite tight and require a bit of force to loosen them. If you are able, it could be helpful to have another person assist you with this task. Once the screws are removed the latch should slide out of the door with ease. If it is stuck or doesn't move using a nail file to scrape the edges of the latch plate. This may help free the plate. Now you can prepare the new strike plate for installation. Utilizing the screws made of wood that were included with your new handles, attach the latch plate to the inside of the doorjamb. Do not overtighten your screws because this could damage the strike plate. If you're not sure whether the latch plate is in the correct position Try closing and then opening the door to check whether it locks and closes correctly. If it doesn't, you will need to adjust the strikeplate up or down or forward or back until the door shuts correctly. If the door is still moving or jiggles, you might have to expand your latch hole on the strike plate. This is more prevalent on older doors. It can be caused by wear and tear hinges that are too small, a wrong size latch or damaged strike plate. If this is the situation, use a metal filing instead of a chisel, or hammer to adjust the strike plate. Take off the Latch The latch is an angled metal piece which slides in and out of a hole in the inside of your door. The latch moves forward when you turn the handle. It also hooks into the door's frame so that the door is closed. If your door wiggles when you close it, replacing the latch could be the only thing needed to fix it. It's difficult to see the screws that secure the latch to the door, however there's usually a small slot on the trim plate that lets you to insert a screwdriver in order to remove it. After removal of the trim plate you should be able to remove the latch as well as the bolts that hold it in place and the spindle in position. If the latch isn't easily removed using a paperclip or tool to take it off the handle mechanism. Insert the item in the recessed slot of the latch and gently twist it or jiggle until the that the latch and handle begin to split. You may need to repeat this several times before the latch is loose enough to allow it to be pulled out. Once the old latch is removed it should be possible to move the new latch into the slot with no problems. Use your new screws to attach the latch to the strike plate or door frame. Make sure that it is properly positioned in the slot, aligned with the screw chambers. Before you install the new handle, be certain to measure your existing backset (the distance from the centre of the big hole on the front surface of the door to the edge). Make sure that the size of the latch of the new handle matches the measurement. If you are replacing the handle or latch or handle, or if the old lock cylinder has been damaged, then you'll require a new one. If you're not changing locks the new lock will fit in the recess you have already installed, and will work with the keys you have already. Pick a latch that has rectangular cover plates that match your existing handles. Removing the Cover Plate Door handles may begin to look worn over time If you replace them with a modern lever on rose design it's an easy and quick DIY and decorating project that will enhance the overall appearance of your home. You can purchase complete sets with matching the escutcheons as well as privacy adaptors and escutcheons. To replace the door handle inside, remove the cover plate (or rose) that covers the screws and mechanism. Look for an release tab on the plate and employ a flathead screwdriver pop it off the knob. It could have an opening along one side or be secured by pins. After the cover plate is off take the screw that holds the inside handle in place and set it aside. Take off the screws that hold both the outer and inner plates. You can loosen them using a Philips Screwdriver. Then, take the inner plates and latch plate from the door and set them aside. Most doors have gaps between the door jamb and the edge of the frame that makes room for a handle, however not all have. If it doesn't, you'll need to make a hole in the door for the new handle. The process for doing this is the same as for opening a door with a lock, but you'll have to be extra careful to avoid damaging the door or frame. After the holes are drilled, you'll need to install new door knob screws. Choose the same dimensions as your old screws to prevent getting a handle that is too loose or tight. You'll also need to install a new latch plate and strike rod, which aren't included with the majority of door handle sets. Amazon's Choice FAERSI 2-piece chrome finish handle sets are a great alternative if you're in search of a high-quality interior door handle replacement set. It is a factory-fit and has received hundreds of 5-star reviews. It's a great option for replacing worn or damaged door handle hardware in the interior of your Chevy HHR.